[CS800DMR] BTW, what's the "other" programming cable used for?
Well, I inserted the DB15 cable and it's working well. What is the "other programming cable that appears to plug into the microphone jack?
Question
A friend of mine just got his CS800. In the box is a USB to RJ45 cable. He also has the programming cable which is USB to DS9. So what the heck is the other USB cable to be used for?
Showing posts with label Connect Systems CS800. Show all posts
Showing posts with label Connect Systems CS800. Show all posts
CS800 read and write to the radio
CS800 read and write to the radio
Here How I read and write.
1) Use CSI's USB to serial cable.
2) Use CSI CPS_V3.03.20.
3) just pushed the power button only to turn on the radio
Do not pushed and held P1 with power button (It is only for firmware update only)
4) Use CPS V3.03.20 to readi and write the radio.
USB to MIC connector cable is not for read and write to the radio.
Please use the USB to Serial cable.
Question::
Having trouble reading my new CS800. Downloaded CPS version 3.03.25 and installed under Windows 8.1.
Here How I read and write.
1) Use CSI's USB to serial cable.
2) Use CSI CPS_V3.03.20.
3) just pushed the power button only to turn on the radio
Do not pushed and held P1 with power button (It is only for firmware update only)
4) Use CPS V3.03.20 to readi and write the radio.
USB to MIC connector cable is not for read and write to the radio.
Please use the USB to Serial cable.
Question::
Having trouble reading my new CS800. Downloaded CPS version 3.03.25 and installed under Windows 8.1.
Ham Radio 2.0: Episode 6 - Unboxing the Connect Systems CS800 Mobile DMR Radio
Ham Radio 2.0: Episode 6 - Unboxing the Connect Systems CS800 Mobile DMR Radio
CS800 Availability
CS800 Availability
On Tue, Jun 30, 2015 at 2:20 PM,
If you already put your order in for the CS800 mobile radio and we have not been able to contact you call Erin at 818 889 0503 and if you did not already pre-order it but would like to buy one please call same number and ask for Erin or Chris or me to take the order. The price of the radio is $280 and the pair of programming cables is $15. They are in stock at the current time and we expect another 400 over the next 20 days.
Jerry Wanger KK6LFS
Contact lists for uploading to CSI radios
Contact lists for uploading to CS750 or other CSI radios
DMR-Marc.net updates the contact lists nightly, especially since they are the ones who generate the new users lists.
Here is a source, supposedly updated daily, with all DMR contacts sorted by nation and state.
http://www.foxhollow.ca/DMR/Contacts/ALL-DMR-Contacts.ZIP
Does the CS750 radio support 65k+ users contacts? The reason I am asking is that the CS750 CPS software crashes when I am trying to upload a large file. Has anyone tried to upload 8000+ contacts?
Some time in the future after a few more FW upgrades, this will then be possible.
Here is a source, supposedly updated daily, with all DMR contacts sorted by nation and state.
http://www.foxhollow.ca/DMR/Contacts/
The foxhollow server downloads & processes the nightly full database from the DMR-MARC website. If you know of someone that got a new ID today, the foxhollow download ZIP file will have that new ID by tomorrow morning.
I currently create the files in CS700/MD380 CSV format as well as CS750 XLSX format. If another type of file is needed, send me a message and I'll add it to the daily dumps.
I currently create the files in CS700/MD380 CSV format as well as CS750 XLSX format. If another type of file is needed, send me a message and I'll add it to the daily dumps.
Posted by: mark-yahoo@foxhollow.ca
Repair of CS800 External Speaker Problem
Connect Systems is going to offer you three options for fixing the external speaker problem:
1. You can send the radio to us and we will pay for shipping both ways. We will get you a FedEx or USPS call tag to send it back to us. WE WILL NOT REIMBURSE YOU IF YOU SEND IT YOURSELF.
2. We will send you a P4KE12CA diode and have you install it yourself. To install the diode you need to take off the top cover and install the diode on top of the Speaker Jack. This is a relatively easy job because it is NOT surface mount. The diodes are a D041 case with leads.
3. You do nothing.
4. At this time this is only a possibility. We will supply a diode on an external device that will plug into the radio and you will then plug your speaker into that external device.
1. You can send the radio to us and we will pay for shipping both ways. We will get you a FedEx or USPS call tag to send it back to us. WE WILL NOT REIMBURSE YOU IF YOU SEND IT YOURSELF.
2. We will send you a P4KE12CA diode and have you install it yourself. To install the diode you need to take off the top cover and install the diode on top of the Speaker Jack. This is a relatively easy job because it is NOT surface mount. The diodes are a D041 case with leads.
3. You do nothing.
4. At this time this is only a possibility. We will supply a diode on an external device that will plug into the radio and you will then plug your speaker into that external device.
Upgrade Firmware for CS800
Upgrade Firmware for CS800 (Disclaimer-It worked for me)
Disclaimer- Not an expert, Not a representative of CSI and it worked for me. If you don't have a basic understanding of manipulating softwares and files, then make sure you understand before you start messing around or ask for help from somebody that does.
To upgrade your CS800 to the lastest firmware, You will need the latest flash burn version 1.10
which you can get from the Connect Systems Website under the CS750 Radio. Its not under the CS800 section. Flashburn 1.10 Download and open it. Minimize it (has an icon of a micro chip).
You will need it later to upload the Mobile bootloader R2.01S.bin and the Firmware version 1.01.01 .bin
to your CS800. (MUST LOAD BOOT LOADER FIRST)
Download the Mobile_Bootloader_ R2.01S.bin from the CS800 Section of the Connect Systems Website
CS800 power settings
I was confused by the power setting listed in the CS800 manual. It lists 25w low, 45w UHF/50w VHF high. however the radio shows low, medium, and high settings. I checked the radio on analog with my bird meter and it shows 5 watts low, 25 watts medium, and 50 watts high. Another ham confirmed those readings with a service monitor. My bird meter will only show half the output for a digital signal but the readings I got were close to what I saw for analog. Several of us in my area were using the low setting assuming it was 25 watts but it fact we were only putting out about 5 watts. My advice is to verify for yourself what is listed in the manual because I am sure there are other mistakes listed.
Posted by: Richard W7AM
Posted by: Richard W7AM
[CS800] separating the front head
Answer:
Push the tab as you have done then you slide the front to the left. It does not pull out like your instincts would show.
Who would have thunk it slid off, rather than "popped" off!
CS800 USING EXTERNAL SPEAKERS - IMPORTANT NOTICE - UPDATE JUNE 17
Reply-To: CS800DMR@yahoogroups.com
Here is the latest information and our recommendation -
Currently, we request that you DO NOT USE any external speaker of any impedance value with the CS800. We are working on solutions to correct this problem as quickly as possible.
We have been able to recreate the damage to the audio output system while using an external speaker. On careful analysis, Jerry has determined that this problem originates in speakers with a high inductance, and that impedance will play little role. The cause is a voltage spike generated due to high inductance that is reflected back into the system, overpowering the MOSFETs. The spike is generated when a sharp waveform is passed to the speaker, which is possible under both analog and digital reception.
We are researching solutions and have some ideas that need to be tested and approved by the manufacturer. We will publish the changes for those who would like to make the modification
Here is the latest information and our recommendation -
Currently, we request that you DO NOT USE any external speaker of any impedance value with the CS800. We are working on solutions to correct this problem as quickly as possible.
We have been able to recreate the damage to the audio output system while using an external speaker. On careful analysis, Jerry has determined that this problem originates in speakers with a high inductance, and that impedance will play little role. The cause is a voltage spike generated due to high inductance that is reflected back into the system, overpowering the MOSFETs. The spike is generated when a sharp waveform is passed to the speaker, which is possible under both analog and digital reception.
We are researching solutions and have some ideas that need to be tested and approved by the manufacturer. We will publish the changes for those who would like to make the modification
CS800 Using External Speaker - UPDATE
CS800 Using External Speaker - UPDATE
Reply-To: CS800DMR@yahoogroups.com
We have been testing a variety of scenarios and researching the circuitry on the CS800 since the last post. Here is the latest information:
The audio output is rated to handle between 2 and 16 ohms, and is supposed to be able to handle a dead short. The part number for the audio amplifier is TDA2003 in case anyone is interested in doing additional research. We do not suggest experimenting on your radio - but instead we are providing this to assure folks that we will not currently be refusing warranty repair or replacement if the audio output is compromised.
We have tried to break a couple of radios by using a variety of speakers with a range of impedance values, but we have yet to recreate the problem. Our manufacturer is also investigating the problem, and we are exchanging information often.
We have heard that some folks are using an external speaker with no problems noted. While there is probably no need to disconnect existing speakers that are working, we are leaning toward the conservative view until we know more. The purpose behind our current recommendation is to avoid any more damaged radios until we can determine a specific cause. It may have nothing to do with an external speaker, but right now that is the only item in common.
Reply-To: CS800DMR@yahoogroups.com
We have been testing a variety of scenarios and researching the circuitry on the CS800 since the last post. Here is the latest information:
The audio output is rated to handle between 2 and 16 ohms, and is supposed to be able to handle a dead short. The part number for the audio amplifier is TDA2003 in case anyone is interested in doing additional research. We do not suggest experimenting on your radio - but instead we are providing this to assure folks that we will not currently be refusing warranty repair or replacement if the audio output is compromised.
We have tried to break a couple of radios by using a variety of speakers with a range of impedance values, but we have yet to recreate the problem. Our manufacturer is also investigating the problem, and we are exchanging information often.
We have heard that some folks are using an external speaker with no problems noted. While there is probably no need to disconnect existing speakers that are working, we are leaning toward the conservative view until we know more. The purpose behind our current recommendation is to avoid any more damaged radios until we can determine a specific cause. It may have nothing to do with an external speaker, but right now that is the only item in common.
CS800 volume control function
CS800 volume control function
After additional research, I have discovered P7 & P8 are functions on the volume control, which if pushed in, there is a switch contact there for the timed "button" push.... also the volume knob/control function
That being said, My CS800 volume control function returned, after I set F7 "short" to 'volume up' and "long" to 'volume down'
Thanks,
Harold Yarian
N0YH
After additional research, I have discovered P7 & P8 are functions on the volume control, which if pushed in, there is a switch contact there for the timed "button" push.... also the volume knob/control function
That being said, My CS800 volume control function returned, after I set F7 "short" to 'volume up' and "long" to 'volume down'
Thanks,
Harold Yarian
N0YH
update #12 - Connect Systems Inc
Greetings to the DMR Groups.
I'll begin with a thank you for all of your reports and comments regarding your experiences with the CS750 and CS800. I will also apologize for not posting more often, but things are very busy at CSI right now.
Good news first then - as some of you have already noticed, we posted the Data Extraction tool for the CS700 .rdt files, written for us by Tom Wheeler who also created the Contact Manager software. This tool will extract your Contacts and Channels information from the .rdt file and export them into an Excel spreadsheet. Yes, unfortunately Excel is still required at this time. From there, they can be imported into the CPS. Due to the nature of interdependencies in the CPS, we cannot export or import Zone, Scan, or Receive Group
information. We are aware that this still leaves quite a bit of additional programming, but the heavy lifting of large contacts lists and extensive channel information is handled by the new tool. One more important note - import your Contacts FIRST and then your Channels, otherwise the TX groups will not populate correctly.
On to the bugs. Please continue to post any issues that you find with our radios, even if it is listed below. I read every post placed here even though I cannot respond to most of them. We are chasing down some elusive causes for these problems and you never know who might post that one small bit of information regarding a setup or experience that provides a critical clue. This is by no means a complete list, but these are the priority items now for both the CS750 and the CS800.
I'll begin with a thank you for all of your reports and comments regarding your experiences with the CS750 and CS800. I will also apologize for not posting more often, but things are very busy at CSI right now.
Good news first then - as some of you have already noticed, we posted the Data Extraction tool for the CS700 .rdt files, written for us by Tom Wheeler who also created the Contact Manager software. This tool will extract your Contacts and Channels information from the .rdt file and export them into an Excel spreadsheet. Yes, unfortunately Excel is still required at this time. From there, they can be imported into the CPS. Due to the nature of interdependencies in the CPS, we cannot export or import Zone, Scan, or Receive Group
information. We are aware that this still leaves quite a bit of additional programming, but the heavy lifting of large contacts lists and extensive channel information is handled by the new tool. One more important note - import your Contacts FIRST and then your Channels, otherwise the TX groups will not populate correctly.
On to the bugs. Please continue to post any issues that you find with our radios, even if it is listed below. I read every post placed here even though I cannot respond to most of them. We are chasing down some elusive causes for these problems and you never know who might post that one small bit of information regarding a setup or experience that provides a critical clue. This is by no means a complete list, but these are the priority items now for both the CS750 and the CS800.
Connect Systems CS800 remote mount kit
All you need is a cat 5 cable or the 20.00 flat cable remote mount is on radio just pull 4 screws behind head
CS800 Suggest the button settings
CS800 Suggest the button settings?
P1 Scam on/off and Nuisanca Delete.
P2 Repeat/Talkaround and Power Switch
P3 All Alert on/off and Monitor
P5 Channel Up and Zone Up
P6 Channel Down and Zone Down
P8 Forward: Volume up
Reverse: Volume Down.
P1 Scam on/off and Nuisanca Delete.
P2 Repeat/Talkaround and Power Switch
P3 All Alert on/off and Monitor
P5 Channel Up and Zone Up
P6 Channel Down and Zone Down
P8 Forward: Volume up
Reverse: Volume Down.
CS800 / CS801
Product Features
| Form factor | Mobile/Base |
| LCD | Yes |
| Voice modes | Analog/DMR |
| Power @ VHF 136-174 | 50W |
| Power @ UHF 400-470 | 45W |
| Housing Material | Plastic/Metal |
| Durability rating | MIL Spec |
| Keypad | on optional mic |
| Power Requirements | 11-16V DC |
| Programming method | Keypad/PC |
| Warranty | 1 Year |
Subscribe to:
Posts (Atom)