CS800 Firmware V2.00.04

A bug was found late yesterday after firmware version S2.00.04_20150916 was posted. While the firmware enables the Monitor function on the CS800, it unfortunately causes the display to go blank for talk group and contact information. A quick repair was sent from the manufacturer, but there are some items to be aware of.

The repair was released with the same version number but a different date. Look for the release under September 18 on our website as firmware S2.00.04_20150918. This fixes the display problem, but unfortunately disables the Monitor function to do so. This is temporary, and a new release that handles both will come out as soon as possible. Do note that keypad programming via the microphone is available in this version.

We apologize in advance for the confusion.

Chris Edwards
Connect Systems Inc.


 Have a look here:
http://cs800.blogspot.ca/p/software-and-firmware-for-cs800cs801.html

1 comment:

  1. Anonymous9/29/2015

    Just in case those that write the firmware monitor this blog, I have a wish list idea for a future firmware upgrade, an Auto Power Off (APO) feature. I have an ID800 and IC706 in my car and both are setup to automatically turn off after 30 minutes of no use. This is a great battery saving feature.

    How many of us have left a rig on over night only to find we have that flat batter in our cars the next morning?

    APO is a must have feature of any radio I plan on using mobile.

    So if you firmware guys read this, keep it in mind for version 2.0.06 ;)

    ReplyDelete

Thanks for your comments, Comments may take a day to show up

A discussion group about this subject.

Digital Ham Radio / Amateur Radio
DigitalHamRADIO@groups.io
https://groups.io/g/DigitalHamRADIO

Amateur Radio Users Support Group
AmateurRadio@groups.io
https://groups.io/g/AmateurRadio

Note: only a member of this blog may post a comment.