CS800 Published Bug List

Connect Systems :  This is by no means a complete list, but these are the priority items now for both the CS750 and the CS800.


That is the short 'Hot List'
- CS800DMR Yahoo Group

• 1) Quirkiness upon initial release fixed a lot with firmware 1.01.01, but there are still some more bugs left to be squashed with an imminent firmware update, with a later firmware update planned to "open up" maximum allowed IDs from 1,000 to 10,000?
• 2) The speaker output fix can be applied by the owner or shipped back to CS to fix, postage free.
• 3) Motorboating is believed to be some feedback issue fixable with the installation of a capacitor inserted inside the hand microphone (this is alluded to in one message here, but I can find no hint of this fix anywhere else)? 
• 4) Pinouts of DB15HD connector documented "theoretically", but not tested? "Your mileage might vary", "if you are caught Mr. Phelps, this company will disavow any knowledge of your actions"???? Any chance that CS could check on whether the " sorta " documented pinouts can be used or not? 
• CS800 - When I convert the codeplug from 3.03.28 to 4.00.06, then load it to the radio, the display is complete unreadable distortion. Also trying to change the channel in this condition gives an audible of channel zero or channel one only. Radio not useable in this condition. What to resort back to loading previous codeplug with 3.03.28.

• Intermittent TX / RX issues on both time slots - [csidmr]
• 'Motorboating' noise during TX (CS800) - CS800 Motorboating Like Sound
• Power level changes via menu not operational (CS800)
• DTMF feature not operational - CS800DMR Yahoo Group
• Menu access not available during Digital RX - CS800DMR Yahoo Group
• RSSI intermittent or not representative of actual signal  - CS800DMR Yahoo Group
• Send Message Failure resulted in automatic shutdown of CS-800!
• New Anomaly in my CS-800, I am sure not high on the priority list as there are bigger fish to fry. However, I was testing the text messaging feature with another HAM. The message failed. (which is ok) but after the message failed, THE RADIO SHUT OFF! I tried it again and it did the same thing. IT SHUT OFF. Please note I am not using the messaging feature  anyway but since I found this problem in my particular radio, I thought I would share it in case its a bug. Don't shoot the messenger. 73's Bill McCasland N1AK
• 
   

- CS800DMR Yahoo Group

Please comment below to add to this list

.